Coffee Table
Rooted in Jepara’s woodworking traditions, the Mulyoharjo Coffee Table offers unmatched elegance and practicality, delivered by a leading furniture supplier.
Elegant round coffee table from northern Italy with "orange slice" veneered with walnut-burr; the central stem of the tripod is in hexagonal solid wood; the three final supports, always in solid wood, are shaped and well whittled with simple and rigorous lines; at the center of the table, there is a delicate and refined inlay reproducing a rose, made by hand with soft precious woods, the two peripheral circles of the top are always inlaid. The most interesting and compelling feature of this table is the workmanship with which it was made: the " wood veneer"( Attention. The exact term is Italian "lastronatura" untranslatable in English, in fact, the "lastronatura" is very different and older than “wood veneer”. Read explanation later). The”lastronatura” is an artisan technique that spread already during the sixteenth century and remained unchanged until the mid-nineteenth century before the Industrial Revolution; it consisted of hand-cutting the trunks of noble wood (walnut, mahogany, briar, walnut-burr, etc.) with ancient saws in so many layers with thicknesses ranging from 4 to 6 millimeters, which were then applied to furniture for decorative purposes; the finishing of this procedure was very complex: the wood layer was treated with natural earth dissolved in water for the desired shade, it was aged with stone, fixed with shellac applied with a brush and finally polishing was performed in 12 steps with a cotton pad sMindied in shellac, straw oil with pumice stone powder. The “lastronatura” should not be confused with the “wood veneer” which is a modern process, in fact, the wood layer is cut by machine and the thickness is below 1 mm, while that of the “lastronatura”, as already mentioned, is from 4 to 6 mm. Our coffee table comes from Northern Italy and was worked in 1850 with the most ancient technique that enhances the colors, and the grain of the walnut. D.cm.77 H.cm.73
Hand-Made
Size : 30,32 x 30,32 x 28,75
Material : Walnut
Color : Coffee
Made-in Indonesia
Purchases from outside Indonesia, MOQ: 1 x 20ft container, can be 1 item or mix various Furniture designs.
Italian Coffee Table in Walnut-Burr Furniture Supplier
Mulyoharjo Furniture Supplier Italian Coffee Table in Walnut-Burr .Elegant round coffee table from northern Italy with "orange slice" veneered with walnut-burr; the central stem of the tripod is in hexagonal solid wood; the three final supports, always in solid wood, are shaped and well whittled with simple and rigorous lines; at the center of the table, there is a delicate and refined inlay reproducing a rose, made by hand with soft precious woods, the two peripheral circles of the top are always inlaid. The most interesting and compelling feature of this table is the workmanship with which it was made: the " wood veneer"( Attention. The exact term is Italian "lastronatura" untranslatable in English, in fact, the "lastronatura" is very different and older than “wood veneer”. Read explanation later). The”lastronatura” is an artisan technique that spread already during the sixteenth century and remained unchanged until the mid-nineteenth century before the Industrial Revolution; it consisted of hand-cutting the trunks of noble wood (walnut, mahogany, briar, walnut-burr, etc.) with ancient saws in so many layers with thicknesses ranging from 4 to 6 millimeters, which were then applied to furniture for decorative purposes; the finishing of this procedure was very complex: the wood layer was treated with natural earth dissolved in water for the desired shade, it was aged with stone, fixed with shellac applied with a brush and finally polishing was performed in 12 steps with a cotton pad sMindied in shellac, straw oil with pumice stone powder. The “lastronatura” should not be confused with the “wood veneer” which is a modern process, in fact, the wood layer is cut by machine and the thickness is below 1 mm, while that of the “lastronatura”, as already mentioned, is from 4 to 6 mm. Our coffee table comes from Northern Italy and was worked in 1850 with the most ancient technique that enhances the colors, and the grain of the walnut. D.cm.77 H.cm.73
Rooted in Jepara’s woodworking traditions, the Mulyoharjo Coffee Table offers unmatched elegance and practicality, delivered by a leading furniture supplier.
mcfe575
8 Items
Specific References
- MPN
- mcfe575
Comments (0)
No customer reviews for the moment.
Viewed products
8 other products in the same category:
Rooted in Jepara’s woodworking traditions, the Mulyoharjo Coffee Table offers unmatched elegance and practicality, delivered by a leading furniture supplier.
Elegant round coffee table from northern Italy with "orange slice" veneered with walnut-burr; the central stem of the tripod is in hexagonal solid wood; the three final supports, always in solid wood, are shaped and well whittled with simple and rigorous lines; at the center of the table, there is a delicate and refined inlay reproducing a rose, made by hand with soft precious woods, the two peripheral circles of the top are always inlaid. The most interesting and compelling feature of this table is the workmanship with which it was made: the " wood veneer"( Attention. The exact term is Italian "lastronatura" untranslatable in English, in fact, the "lastronatura" is very different and older than “wood veneer”. Read explanation later). The”lastronatura” is an artisan technique that spread already during the sixteenth century and remained unchanged until the mid-nineteenth century before the Industrial Revolution; it consisted of hand-cutting the trunks of noble wood (walnut, mahogany, briar, walnut-burr, etc.) with ancient saws in so many layers with thicknesses ranging from 4 to 6 millimeters, which were then applied to furniture for decorative purposes; the finishing of this procedure was very complex: the wood layer was treated with natural earth dissolved in water for the desired shade, it was aged with stone, fixed with shellac applied with a brush and finally polishing was performed in 12 steps with a cotton pad sMindied in shellac, straw oil with pumice stone powder. The “lastronatura” should not be confused with the “wood veneer” which is a modern process, in fact, the wood layer is cut by machine and the thickness is below 1 mm, while that of the “lastronatura”, as already mentioned, is from 4 to 6 mm. Our coffee table comes from Northern Italy and was worked in 1850 with the most ancient technique that enhances the colors, and the grain of the walnut. D.cm.77 H.cm.73
Hand-Made
Size : 30,32 x 30,32 x 28,75
Material : Walnut
Color : Coffee
Made-in Indonesia